CN2600

8 and 16-port RS-232/422/485 terminal servers with dual-LAN redundancy

Producător: MOXA
Producător: MOXA
  •  LCD panel for easy IP address configuration (excluding wide-temperature range models)
  •  Dual-LAN cards with two independent MAC addresses and IP addresses
  •  Redundant COM function available when both LANs are active
  •  Dual-host redundancy can be used to add a backup PC to your system
  •  Dual-AC-power inputs (for AC models only)
  •  Real COM/TTY drivers for Windows and Linux
  •  Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC
Preț de la 6.115,00 RON Net

Preț prea mare? Autentificați-vă și cumpărați mai ieftin

În livrare

Livrare gratuita de la 500 RON

Vezi 16 model

Promocja cenowa na model HDR-15-5

Produs destinat exclusiv utilizării profesionale

Modele

Accesorii

Descriere

Redundancy is an important issue for industrial networks, and various types of solutions have been developed to provide alternative network paths when equipment or software failures occur. “Watchdog” hardware is installed to utilize redundant hardware, and a “Token”- switching software mechanism is applied. The CN2600 terminal server uses its built-in Dual-LAN ports to implement a “Redundant COM” mode that keeps your applications running uninterrupted.

Dual-LAN Redundancy

The CN2600 has two separate LAN ports that can be connected to separate LAN networks. Dual-LAN redundancy involves setting up two separate physical networks to connect the PC host with the CN2600 (the PC host also requires two LAN cards). If one connection fails, the PC host can still communicate with your serial devices over the alternative LAN connection.

Redundant COM

Moxa offers “Redundant COM,” an easy-to-use application to provide an alternative solution for network redundancy. When the CN2600 receives a data packet from a connected device, two identical data packets are sent over two independent LAN connections to prevent lost data packets if one LAN connection becomes unavailable. The CN2600 software is programmed to automatically discard duplicate data packets.

Dual-host Redundancy

The CN2600’s dual-LAN cards can also be used to set up “dual-host” redundancy. In this case, both networks (LAN A and LAN B in the figure) are connected to two different hosts. If either of the two hosts shuts down unexpectedly, the other host will still be able to communicate with serial devices connected to the CN2600.

Dual-AC Model Supported

Dual-power redundancy uses two power inputs and redundant internal power supplies to ensure that all of the CN2600’s functions will be available, even in the event of power circuit failures.

Specificație tehnică

  • Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector) 2
Magnetic Isolation Protection 1.5 kV (built-in)
  • Ethernet Software Features
Configuration Options CN2610-8/CN2610-16: Serial Console, Telnet Console, Windows Utility, Device Search Utility (DSU)
CN2650-8/CN2650-16/CN2600-2AC models: Serial Console, Telnet Console, Windows Utility, Device Search Utility (DSU), Web console (HTTP/HTTPS)
Management ARP, BOOTP, DDNS, DHCP Client, DNS, HTTP, IPv4, SMTP, SNMPv1/v2c/v3, TCP/IP, Telnet, UDP, ICMP, SLIP
MIB MIB-II
Security HTTPS/SSL, RADIUS, SSH, PAP, CHAP
Unicast Routing RIPV1/V2, Static Route
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2/2016/2019 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Linux Real TTY Drivers Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x
Fixed TTY Drivers SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Android API Android 3.1.x and later
  • Serial Interface
Connector CN2610/CN2650 models: 8-pin RJ45
CN2650I models: DB9 male
No. of Ports CN2600-8 models: 8
CN2600-16 models: 16
Serial Standards CN2610 models: RS-232
CN2650 models: RS-232/422/485
Operation Modes Real COM mode, TCP Server mode, TCP Client mode, UDP mode, RFC2217 mode, Terminal mode, Reverse Telnet mode, PPP mode, DRDAS mode, Redundant COM mode, Disabled
Baudrate 50 bps to 921.6 kbps
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control None, RTS/CTS, DTR/DSR, XON/XOFF
Isolation CN2650I models: 2 kV
RS-485 Data Direction Control ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms
Terminator for RS-485 120 ohms
Console Port RS-232 (TxD, RxD, GND), 8-pin RJ45 (19200, n, 8, 1)
  • Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
  • Power Parameters
No. of Power Inputs -2AC models: 2
All other models: 1
Input Current -HV models: 200 mA @ 88 VDC
All other models: 130 mA @ 110 VAC
Input Voltage -HV models: 110 VDC (88 to 300 VDC)
All other models: 100 to 240 VAC, 47 to 63 Hz
  • Reliability
Automatic Reboot Trigger Built-in WDT
Alert Tools Built-in buzzer and RTC (real-time clock)
  • Physical Characteristics
Housing Metal
Installation 19-inch rack mounting
Dimensions (with ears) 480 x 198 x 45.5 mm (18.9 x 7.80 x 1.77 in)
Dimensions (without ears) 440 x 198 x 45.5 mm (17.32 x 7.80 x 1.77 in)
Weight CN2610-8/CN2650-8: 2,410 g (5.31 lb)
CN2610-16/CN2650-16: 2,460 g (5.42 lb)
CN2610-8-2AC/CN2650-8-2AC/CN2650-8-2AC-T: 2,560 g (5.64 lb)
CN2610-16-2AC/CN2650-16-2AC/CN2650-16-2AC-T: 2,640 g (5.82 lb)
CN2650I-8: 3,907 g (8.61 lb)
CN2650I-16: 4,046 g (8.92 lb)
CN2650I-8-2AC: 4,284 g (9.44 lb)
CN2650I-16-2AC: 4,423 g (9.75 lb)
CN2650I-8-HV-T: 3,848 g (8.48 lb)
CN2650I-16-HV-T: 3,987 g (8.79 lb)
  • Environmental Limits
Operating Temperature Standard Models: 0 to 55°C (32 to 131°F)
CN2650-8-2AC-T/CN2650-16-2AC-T: -40 to 75°C (-40 to 167°F)
CN2650I-8-HV-T/CN2650I-16-HV-T: -40 to 85°C (-40 to 185°F)
Storage Temperature (package included) Standard Models: 0 to 55°C (32 to 131°F)
CN2650-8-2AC-T/CN2650-16-2AC-T: -40 to 75°C (-40 to 167°F)
CN2650I-8-HV-T/CN2650I-16-HV-T: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
  • Standards and Certifications
EMC CN2650I models: EN 55032/35
All other models: EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS -HV models:
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m
IEC 61000-4-8 PFMF

All other models:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2.5 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-11
Safety CN2650I models: UL 62368-1
All other models: UL 60950-1
Vibration IEC 60068-2-6
Freefall IEC 60068-2-32
  • Declaration
Green Product RoHS, CRoHS, WEEE
  • MTBF
Time CN2610-8: 831,925 hrs
CN2610-16: 639,332 hrs
CN2610-8-2AC/CN2650-8-2AC: 773,268 hrs
CN2610-16-2AC: 604,346 hrs
CN2650-8: 657,123 hrs
CN2650-16: 457,175 hrs
CN2650-16-2AC: 442,699 hrs
CN2650I-8: 374,652 hrs
CN2650I-8-2AC: 370,752 hrs
CN2650-8-2AC-T: 190,562 hrs
CN2650I-16: 248,847 hrs
CN2650I-16-2AC: 247,119 hrs
CN2650-16-2AC-T: 115,887 hrs
CN2650I-8-HV-T: 357,995 hrs
CN2650I-16-HV-T: 241,404 hrs
Standards Telcordia (Bellcore) Standard TR/SR

Produse recomandate

Contactați un specialist Elmark

Ai întrebări? Ai nevoie de sfaturi? Sună-ne sau scrie-ne!