NPort 5610/5630

8 and 16-port RS-232 or RS-422/485 rackmount serial device servers

Producător: MOXA
Producător: MOXA
  •  Standard 19-inch rackmount size
  •  Easy IP address configuration with LCD panel (excluding wide-temperature models)
  •  Configure by Telnet, web browser, or Windows utility
  •  Socket modes: TCP server, TCP client, UDP
  •  SNMP MIB-II for network management
  •  Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC
  •  Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
Preț de la 4.215,00 RON Net

Preț prea mare? Autentificați-vă și cumpărați mai ieftin

În stoc

Plasați comanda până la ora 12:00, iar coletul va fi expediat în aceeași zi

Livrare gratuita de la 500 RON

Vezi 6 model

Promocja cenowa na model HDR-15-5

Modele

Filtru: ()
Filtre
Filtre()

Accesorii

Useful products

Descriere

With the NPort® 5600 Rackmount Series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network.

Network Readiness for up to 16 Serial Devices

Only basic configuration is needed with the NPort® 5600 to connect up to 16 serial devices to an Ethernet network.

19-Inch Rackmount Device Server

NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5600 device servers suitable for a standard 19-inch rackmount, allowing you to simplify operational, maintenance, and administrative tasks.

Real COM/TTY Ports

Real COM/TTY drivers are provided to make the serial ports on the NPort® 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.

LED Indicators to Ease Your Maintenance Tasks

The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but they also help field engineers monitor the status of attached serial devices.

Adjustable Termination and Pull High/Low Resistors

When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5650-8/16 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.

 

Specificație tehnică

  • Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector) 1
Magnetic Isolation Protection 1.5 kV (built-in)
  • Ethernet Software Features
Configuration Options Telnet Console, Web Console (HTTP/HTTPS), Windows Utility
Management ARP, BOOTP, DHCP Client, DNS, HTTP, HTTPS, ICMP, IPv4, LLDP, RFC2217, Rtelnet, PPP, SLIP, SMTP, SNMPv1/v2c, TCP/IP, Telnet, UDP
Filter IGMP v1/v2c
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Linux Real TTY Drivers Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x
Fixed TTY Drivers SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Android API Android 3.1.x and later
Time Management SNTP
  • Serial Interface
Connector 8-pin RJ45
No. of Ports 8 or 16 ports
Serial Standards NPort 5610 Series: RS-232
NPort 5630 Series: RS-422, RS-485
Operation Modes Disabled, Ethernet Modem, Pair Connection, Real COM, Reverse Telnet, RFC2217, TCP Client, TCP Server, UDP
Baudrate Supports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control None, RTS/CTS (RS-232 only), DTR/DSR (RS-232 only), XON/XOFF
Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms
Terminator for RS-485 120 ohms
RS-485 Data Direction Control ADDC® (automatic data direction control)
  • Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
  • Power Parameters
Input Current NPort 5610-8-48V/16-48V: 135 mA @ 48 VDC
NPort 5650-8-HV-T/16-HV-T: 152 mA @ 88 VDC
NPort 5610-8/16: 141 mA @ 100 VAC
NPort 5630-8/16: 152 mA @ 100 VAC
Input Voltage HV Models: 88 to 300 VDC
AC Models: 100 to 240 VAC, 47 to 63 Hz
DC Models: ±48 VDC, 20 to 72 VDC, -20 to -72 VDC
  • Reliability
Automatic Reboot Trigger Built-in WDT
  • Physical Characteristics
Housing Metal
Installation 19-inch rack mounting
Dimensions (with ears) 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)
Dimensions (without ears) 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)
Weight NPort 5610-8: 2,290 g (5.05 lb)
NPort 5610-8-48V: 3,160 g (6.97 lb)
NPort 5610-16: 2,490 g (5.49 lb)
NPort 5610-16-48V: 3,260 g (7.19 lb)
NPort 5630-8: 2,510 g (5.53 lb)
NPort 5630-16: 2,560 g (5.64 lb)
Interactive Interface LCD panel display (standard temp. models only)
Push buttons for configuration (standard temp. models only)
  • Environmental Limits
Operating Temperature Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High-Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature (package included) Standard Models: -20 to 70°C (-4 to 158°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High-Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
  • Standards and Certifications
EMI CISPR 32, FCC Part 15B Class A
EMC EN 55032/24
EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2.5 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs
Medical EN 60601-1-2 Class B, EN 55011
Safety UL 60950-1
  • MTBF
Time NPort 5610-8: 877,888 hrs
NPort 5610-8-48V: 870,961 hrs
NPort 5610-16: 666,105 hrs
NPort 5610-16-48V: 662,111 hrs
NPort 5630-8: 765,449 hrs
NPort 5630-16: 473,748 hrs
Standards AC models: MIL-HDBK-217FHV models: Telcordia (Bellcore) Standard TR/SR



Descarca documentatie

Produse recomandate

Contactați un specialist Elmark

Ai întrebări? Ai nevoie de sfaturi? Sună-ne sau scrie-ne!