Vport 464

Superior video performance, 4-channel industrial video encoders

Producător: MOXA
Producător: MOXA
  • Each channel supports 2 D1 30 fps streams simultaneously, or merge 1 quad stream 30 fps image into 4 channels
  • Video latency under 200 ms
  • 2 Ethernet ports for cascading or Ethernet port redundancy
  • DynaStream™ for optimized network efficiency
  • ONVIF support for standardization and interoperability
  • Local storage capability with microSD card slot
  • Industrial design with -40 to 75°C operating temperature
Preț de la 7.500,00 RON Net

Preț prea mare? Autentificați-vă și cumpărați mai ieftin

În livrare

Livrare gratuita de la 500 RON

Vezi 2 model

Promocja cenowa na model HDR-15-5

Produs destinat exclusiv utilizării profesionale

Modele

Accesorii

Descriere

The VPort 464 4-channel industrial video encoder uses the H.264 video compression algorithm to provide the best video quality on the market, but with a smaller bandwidth requirement than other video compression standards. In addition, to meet various requirements, each channel of the VPort 464 can support 2 video streams simultaneously or you can merge all 4 channels into 1 quad view stream using H.264 and MJPEG compression formats, providing greater flexibility for a variety of uses, including viewing, recording, and analysis. The rugged industrial design, which includes a -40 to 75°C operating temperature, IP30 protection, and industrial certifications, make the VPort 464 suitable for harsh environments.

The VPort 464 comes with two Gigabit Ethernet ports and supports cascade mode and network redundancy. In addition, Moxa’s innovative DynaStream™ technology lets you change the video frame rate automatically, allowing you to control your network bandwidth budget and simplify network system management. The CBR Pro™ function guarantees the lowest packet loss for limited bandwidth transmissions to ensure that images will not exhibit the mosaic effect.

Specificație tehnică

  • Memory
microSD Slot SDXC
  • Input/Output Interface
Digital Input Channels 4
Digital Inputs +13 to +30 V for state 1
-30 to +1 V for state 0
Max. input current: 8 mA
Relay Channels 2
Contact Current Rating Resistive load: 1 A @ 24 VDC
Connector Terminal block
  • Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector) 2
  • Ethernet Software Features
Protocols TCP/IP, IPv4/IPv6, UDP, HTTP, RTP/RTSP, ARP, UPnP, FTP, TFTP, SMTP, NTP Client, DNS, DDNS, QoS, IGMP v3, ICMP, SNMPv1/v2c/v3, Modbus TCP, HTTPS, 802.1X, NTCIP
  • Security Functions
Password User-level password protection
Filter IP address
Authentication 802.1X
Encryption HTTPS
  • LED Interface
LED Indicators STAT: Indicates if system is booted up properly or not
Power 1: Power 1 on/off
Power 2: Power 2 on/off
FAULT: Can be configured to correspond to system alarm, power failure, or disconnected network
Video: Video input signal
PTZ: Indicates if PTZ or COM port data has been transmitted
SD: Indicates if SD card was mounted successfully
Network: 10 Mbps or 100 Mbps
  • Serial Interface
PTZ Port 1, RS-232 or RS-422/485 port, terminal block connector, 115.2 kbps
COM Port 1, RS-232 or RS-485 port, DB9 male connector, 115.2 kbps
Console Port 1 RS-232 port, 10-pin RJ45 (115200, n, 8, 1)
  • Power Parameters
No. of Power Inputs 2
Input Voltage Redundant dual inputs
Operating Voltage 12 to 32 VDC, 18 to 30 VAC
Input Current 0.5 A @ 24 VDC
0.83 A @ 24 VAC
Power Connector 2-pin terminal block
  • Video Interface
Video Compression H.264 (ISO/IEC 14496-10) or MJPEG
Video Input 4, BNC connector (1.0 Vpp, 75 ohm)
Video Output via Ethernet
Video Streams 2 independent H.264 or MJPEG video streams
1 quad (4-channel images) stream
NTSC/PAL Auto-sensing or manual
Video Resolution and FPS (frames per second)
Video Viewing DynaStream™ support for changing the video frame rate automatically
CBR Pro™ for good image quality in limited bandwidth transmissions
Adjustable image size and quality
Timestamp and text overlay
OSD (On Screen Display) position adjustable
Maximum of 5 simultaneous unicast connections, 50 multicast clients
Image tuning control: brightness, contrast, saturation, sharpness, noise reduction
  • Audio Interface
Audio Inputs 1 Line-in or MIC-in with 3.5 mm phone jack
Audio Outputs 1 Line-out, with 3.5 mm phone jack
Audio Format Mono, PCM (G.711)
  • Camera Software Development
VPort SDK PLUS Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers
Video Standards ONVIF Profile S
  • Camera PAN/TILT/ZOOM
PTZ Camera Control Via PTZ port or COM port
PTZ Control Functions Pan, tilt, zoom, focus, move speed, preset position (max. 128 positions)
PTZ Function Updates Driver upload supported
Protocols Pelco D, Pelco P, Custom Camera
  • Camera Alarm Software Features
Intelligent Video Camera tampering detection
Video Motion Detection 3 independently configurable areas
Scheduling Daily repeat timing schedule
Imaging JPEG snapshots for pre/trigger/post alarm images
Custom Alarms HTTP event servers for setting customized alarm actions
Email/FTP Messaging Automatic transfer of stored images via email or FTP as event-triggered actions
Pre-Alarm Buffer 50 MB video buffer for JPEG snapshot images
Video Recording Event recordings stored on the SD card
  • Software Requirements
Memory Size 1 GB
Operating System Windows 7 or above
Browser Internet Explorer 9.x or above
Multimedia DirectX 9.0C or above
  • Physical Characteristics
Housing Metal
Dimensions 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in)
Weight 1130 g (2.49 lb)
Installation DIN-rail mounting, Wall mounting (with optional kit)
  • Environmental Limits
Operating Temperature Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude 2000 m
  • Standards and Certifications
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
Freefall IEC 60068-2-31
Safety UL 60950-1
Shock IEC 60068-2-27
Vibration IEC 60068-2-6
  • MTBF
Time 569,152 hrs
Standards Telcordia SR332

Produse recomandate

Contactați un specialist Elmark

Ai întrebări? Ai nevoie de sfaturi? Sună-ne sau scrie-ne!