Stationare

• Charging lead-acid, gel, AGM and lithium-ion batteries
• Programmable charging characteristics Built-in IIC, PMBus interface
• Wide input voltage range (90 ~ 264VAC 127 ~ 370VDC)
• Active PFC power factor improvement function
• Up to 94.5% efficiency (DBR-3200-48)
• MOSFET transistors supporting hot-swap function
• Active fan cooling
• Short circuit, over voltage and temperature protection
• Possibility to connect up to 4 modules into one system with a total power of up to 12800W using the DHP-1U module
• Installation in a rack cabinet - 1U profile
• 5-year warranty

Discounted prices and exact stock levels are visible after logging in to the e-shop.

• Charging lead-acid, gel, AGM and lithium-ion batteries
• Programmable charging characteristics
• Built-in IIC, PMBus interface
• Wide input voltage range (90 ~ 264VAC 127 ~ 370VDC)
• Active PFC power factor improvement function
• Up to 94.5% efficiency (DBU-3200-48)
• MOSFET transistors
• Active fan cooling Short circuit, over voltage and temperature protection
• Signaling the absence and too low battery voltage
• Possibility to connect 2 devices in parallel
• 5-year warranty

Discounted prices and exact stock levels are visible after logging in to the e-shop.

• Wide input voltage range: 90 ~ 264VAC, 127 ~ 400VDC
• Efficiency up to 94.5%
• Selectable operating mode: power adapter / charger (24V/48V models)
• Selectable 2 or 3 step charging curve
• Ability to remotely control the output current and voltage
• MOSFET transistors supporting the hot-swap function
• Possibility of parallel connection of up to 4 NCP-3200 modules using the DHP-1UT-B module and up to 10
• DHP-1UT-B modules in parallel
• Built-in IIC, PMBus/CANBus interface
• Short-circuit, over-current, over-voltage and temperature protection
• Rack mounting - 1U profile
• 5 years warranty

• Charger for lead-acid batteries (flooded, Gel and AGM) and Li-ion batteries (lithium iron and lithium manganese) (Note.1)
• 3 stage charging
• AC 115/230VAC selected by switch
• Built-in passive PFC function compliance to EN61000-3-2 Class A (option)
• Protection: Short circuit / Reverse polarity / Over voltage / Over temperature
• Cooling by free air convection
• 2 color LED loading indicator
• Low cost, High reliability

• Charger for lead-acid batteries (Gel, flooded and AGM) and Li-ion batteries (lithium iron and lithium manganese)
• Built-in default 3 stage charging curves and programmable curve
• Built-in I²C interface, PMBus protocol (Optional CANBus protocol)
• Universal AC input/ Full range (Withstand 300VAC surge input for 5 seconds)
• Built-in active PFC function
• Forced air cooling by built-in DC fan
• Output voltage and current programmable
• Built-in OR-ing FET
• Active current sharing up to 4800W(2+1)
• Protections: Battery under voltage / Battery no connection / Short circuit / Over voltage / Over temperature
• Optional conformal coating

• Charger for lead-acid batteries (Gel, flooded and AGM) and Li-ion batteries (lithium iron and lithium manganese)
• Built-in default 3 stage charging curves and programmable curve
• Built-in I²C interface, PMBus protocol (Optional CANBus protocol)
• Output voltage and current programmable
• Universal AC input / Full range (Withstand 300VAC surge input for 5 seconds)
• Built-in active PFC function
• Forced air cooling by built-in DC fan
• Built-in OR-ing FET, support hot swap (hot plug)
• Active current sharing up to 8000W for one 19” rack shelf
• Protections: Battery under voltage / Battery no connection / Short circuit / Over voltage / Over temperature
• Optional conformal coating

• For MEAN WELL battery chargers with charging curve programmable function(ENC series, RPB/RCB-1600, DBU/DBR-3200, HEP-1000)
• Simple connection and configuration
• No need of battery or AC power
• LED status indicator
• Communication cables for ENC series, RPB-1600, DBU-3200, HEP-1000 are included (USB cable is not included)